Fingerprint access control terminal

ZKTeco SF300 in the UAE

The ZKTeco SF300 is an IP-based fingerprint terminal with a 2.8-inch touch screen that works standalone or on the network. It stores 1,500 fingerprints and 80,000 transactions, supports optional EM or IC cards, and can act as a Wiegand reader to ZKTeco or third-party controllers.

Manufacturer: ZKTeco
Category: Fingerprint & Palm Readers
Credentials: Fingerprint · EM/IC card (optional)
Capacity: 1,500 fingerprints · 5,000 cards · 80,000 transactions
Connectivity: TCP/IP · USB host · Wiegand in/out

Enquire on WhatsApp Get a fixed written quote

Ask for the datasheet on WhatsApp Full specification

Supply, installation and support across all 7 emirates · Same-day response, on-site survey within 48 hours

Features

What the SF300 does

Works in network and standalone modes
2.8-inch resistive touch screen
ZK optical fingerprint sensor (500 DPI), ZKFinger V10.0 algorithm
Wiegand input and output for use as a slave reader with ZKTeco or third-party controllers
Master and slave solution with mutual verification at entrance and exit
Anti-passback
Auxiliary input for emergency linkage, such as a smoke detector
Integrates with ZKBio CVAccess

Best for

Office and back-of-house doors that need fingerprint access with time attendance on one device.

Where it is the wrong choice

Optical sensor, so not the right choice for dusty, wet or gloved hands. Cards are an optional extra and there is no Wi-Fi, so the door needs a network cable.

Specification

Full specification

Taken from ZKTeco's published specification (source). Manufacturers revise specifications between hardware variants and firmware releases, so your quotation names the exact SKU with its confirmed specification.

Brand / Manufacturer	ZKTeco
Display	2.8-inch resistive touch screen LCD
Fingerprint Sensor	ZK Optical Sensor (500 DPI)
Algorithm	ZKFinger V10.0
Communication	TCP/IP, USB-host
Fingerprint Capacity	1,500 Templates
Card Capacity	5,000 (EM/IC Card, optional)
Transaction Capacity	80,000 Transactions
Access Control Interface	Electric Lock, Door Sensor, Alarm, Exit Button, Doorbell
Power Supply	12V DC, 3A
Operating Temperature	0 °C - 45 °C
Operating Humidity	20%-80%
Dimension(LxWxH)	105×105×34mm

Quotation

Get a price for the ZKTeco SF300

We do not publish prices, because the number that matters includes cabling, door hardware, software and installation. Tell us how many units and where, and you get one fixed written quotation.

Stock and lead time confirmed before you commit
Exact SKU and variant named on the quotation
Installation, software setup and staff training included
Free site survey where placement or technology is in doubt

Faster on WhatsApp? Message us about the SF300

Request a quotation

For the ZKTeco SF300. Same-day response.

Questions

Common questions

What is the ZKTeco SF300 best suited to?

Office and back-of-house doors that need fingerprint access with time attendance on one device. Where it is the wrong choice: optical sensor, so not the right choice for dusty, wet or gloved hands. Cards are an optional extra and there is no Wi-Fi, so the door needs a network cable.

How does the ZKTeco SF300 connect?

It supports TCP/IP, USB host, Wiegand in/out. In UAE installations we normally run terminals on wired Ethernet, keeping wireless as the fallback where cabling is impractical.

What software runs the ZKTeco SF300?

It works with ZKBio CVAccess for access control and time attendance; we confirm the pairing on the quotation. We connect the attendance data through to payroll and produce a WPS-ready export, so punches become a payable file rather than a report someone has to retype.

Do you install and support the ZKTeco SF300 across the UAE?

Yes. We supply, install, configure, train your team and support it across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain. Call +971 56 614 2543 or message us on WhatsApp for a fixed written quote.