Skip to content
biometricdeviceTime & Attendance
AI fingerprint terminal
Suprema BioStation 2a

AI fingerprint terminal

Suprema BioStation 2a in the UAE

The Suprema BioStation 2a is a fingerprint access control and attendance terminal with an on-board AI processor (NPU) that uses deep learning to read low-quality, noisy or distorted fingerprints. It matches against 100,000 fingerprint templates, stores 5,000,000 logs, reads RFID and mobile credentials, and is rated IP65 for -20°C to 60°C.

Manufacturer
Suprema
Credentials
Fingerprint · RFID card · Mobile (NFC, BLE) · PIN
Capacity
500,000 users · 100,000 fingerprints (1:N) · 5,000,000 logs
Connectivity
Ethernet · Wi-Fi (OAPWB) · RS-485 (OSDP V2) · Wiegand in/out · PoE · USB host

Supply, installation and support across all 7 emirates · Same-day response, on-site survey within 48 hours

Features

What the BioStation 2a does

  • AI processor (NPU) with deep-learning fingerprint extraction for noisy, distorted or low-quality prints
  • Matches against up to 100,000 fingerprint templates and stores 5,000,000 logs
  • Fingerprint, RFID card, NFC/BLE mobile credentials and PIN, combinable for multi-factor access
  • IP65 rated, operating from -20°C to 60°C indoors or outdoors
  • Secure Element and Secure Boot against tampering and cyberattacks
  • PoE, RS-485 (OSDP V2), Wiegand and USB host for add-on modules
  • 2.8-inch colour screen

Best for

Factories, warehouses and sites with worn or difficult fingerprints, where a standard optical reader rejects too many staff.

Where it is the wrong choice

Fingerprint is its only biometric — for fully contactless entry look at the BioStation 3 Max. Wi-Fi and HID card support are only on the BS2A-OAPWB version.

Specification

Full specification

Taken from Suprema's published specification (source). Manufacturers revise specifications between hardware variants and firmware releases, so your quotation names the exact SKU with its confirmed specification.

Covers 2 variants: BS2A-ODPB, BS2A-OAPWB.

Brand / ManufacturerSuprema
BiometricsFingerprint
RFID card optionsBS2A-ODPB: 125kHz EM & 13.56MHz MIFARE, MIFARE Plus, DESFire, DESFire EV1/EV2/EV3, FeliCa BS2A-OAPWB: 125kHz EM, HID Prox & 13.56MHz MIFARE, MIFARE Plus, DESFire, DESFire EV1/EV2/EV3, iCLASS SE/SR/Seos, FeliCa
RFID read rangeBS2A-ODPB: EM/MIFARE/DESFire: 50 mm, FeliCa: 30 mm BS2A-OAPWB: EM/MIFARE/DESFire/HID iCLASS: 50 mm, HID Prox/FeliCa: 30 mm
Mobile credentialsNFC, BLE
IP ratingIP65
Fingerprint image dimension272 x 320 pixels
Fingerprint image bit depth8 bits, 256 gray scale
Fingerprint resolution500 dpi
Fingerprint templateSUPREMA / ISO19794-2 / ANSI-378
Fingerprint extractor / matcherMINEX certified and compliant
Live Fingerprint DetectionSupported (SW-based)
Max. User500,000
Max. Credential (1:N)Fingerprint: 100,000
Max. Credential (1:1)Fingerprint: 500,000, Card: 500,000, PIN: 500,000
Max. Text Log5,000,000
CPU1.5 GHz Quad Core
Memory16 GB Flash + 2 GB RAM
Crypto ChipSupported
Display2.8” color TFT LCD
Display Resolution320 x 240
LEDMulti-color
Audio16 bit
Operating Temperature-20 °C – 60 °C
Storage Temperature-40 °C – 70 °C
Operating Humidity0 % – 80 %, non-condensing
Storage Humidity0 % – 90 %, non-condensing
WeightDevice: 429 g Bracket (Including washer and bolt): 142 g
Dimension (WxHxD, mm)142 x 144 x 45 (Bottom) / 37.8 (Top) (mm)
CertificationsCE, UKCA, KC, FCC, RCM, SIG, RoHS, REACH, WEEE
EthernetSupported (10/100 Mbps, auto MDI/MDI-X)
Wi-FiBS2A-ODPB: Not supported BS2A-OAPWB: Supported (802.11 b/ g/ n 2.4 GHz)
Network ProtocolTCP, UDP
RS-4851 ch Master / Slave (Selectable)
RS-485 Communication ProtocolOSDP V2 compliant
Wiegand1 ch Input, 1 ch Output
Inputs3 ch Inputs
Relay output1 Relay
USBUSB 2.0 (Host)
USB expansion portSupported
Tamper detectionSupported
PowerVoltage: 12 Vdc, Current: Max. 0.8 A Voltage: 24 Vdc, Current: Max. 0.4 A PoE: Supported (IEEE 802.3af compliant)

Quotation

Get a price for the Suprema BioStation 2a

We do not publish prices, because the number that matters includes cabling, door hardware, software and installation. Tell us how many units and where, and you get one fixed written quotation.
  • Stock and lead time confirmed before you commit
  • Exact SKU and variant named on the quotation
  • Installation, software setup and staff training included
  • Free site survey where placement or technology is in doubt
Faster on WhatsApp? Message us about the BioStation 2a

Request a quotation

For the Suprema BioStation 2a. Same-day response.

Free survey, no obligation. We use your details only to respond to this enquiry — see our privacy notice.

Questions

Common questions

What is the Suprema BioStation 2a best suited to?

Factories, warehouses and sites with worn or difficult fingerprints, where a standard optical reader rejects too many staff. Where it is the wrong choice: fingerprint is its only biometric — for fully contactless entry look at the BioStation 3 Max. Wi-Fi and HID card support are only on the BS2A-OAPWB version.

How does the Suprema BioStation 2a connect?

It supports Ethernet, Wi-Fi (OAPWB), RS-485 (OSDP V2), Wiegand in/out, PoE, USB host. In UAE installations we normally run terminals on wired Ethernet, keeping wireless as the fallback where cabling is impractical.

What software runs the Suprema BioStation 2a?

It works with Suprema's BioStar X security platform. We connect the attendance data through to payroll and produce a WPS-ready export, so punches become a payable file rather than a report someone has to retype.

Do you install and support the Suprema BioStation 2a across the UAE?

Yes. We supply, install, configure, train your team and support it across Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah, Fujairah and Umm Al Quwain. Call +971 56 614 2543 or message us on WhatsApp for a fixed written quote.

Need the Suprema BioStation 2a installed?

Free site survey with enrolment tested on your actual staff, then one fixed written quotation covering hardware, software, installation and training.

Same-day response, on-site survey within 48 hours

CallWhatsAppGet quote
Contact biometricdevice on +971 56 614 2543